Port67— DHCPv4 server
Les serveurs DHCPv4 utilisent UDP 67 et les clients UDP 68. Il s’agit d’un protocole de bail d’adresses, pas d’un site à ouvrir dans un navigateur.
Registry assignments, software defaults and local listeners are different things. A port number alone does not identify or secure a service.
Configuration and troubleshooting
Vérifiez l’interface du serveur, le pool d’adresses et les journaux de baux. Entre sous-réseaux, examinez le relais DHCP ; un test de connectivité TCP ne valide pas DHCP.
Important limitations
Ne démarrez pas de serveur DHCP non planifié sur un réseau de production. La documentation Windows DHCP provient de Microsoft, pas du projet ISC.
Read-only checks: run on the server host
Choose the commands for your OS. Check TCP and UDP separately. No result is not a lasting availability guarantee; inspect host and container separately.
Linux
sudo ss -lunp 'sport = :67'macOS
sudo lsof -nP -iUDP:67Windows PowerShell
Get-NetUDPEndpoint -LocalPort 67Sources and review
Sources checked on:
This review covers the explanations and sources on this page, not your device or every community software entry below.
Logiciels utilisant ce port (3 logiciels)
Community software entries: links are references, not individual verification.
Conseils d’utilisation
- Avant d’utiliser le port 67, vérifiez qu’il n’est pas occupé par d’autres services
- En cas de conflit de ports, envisagez d’utiliser d’autres ports ou d’arrêter le service qui occupe le port
Questions fréquentes
What is port 67 used for?
Port 67 sits in the System category. This page lists the registered purpose and the software commonly associated with it; to see what is actually listening on a specific machine, check the process with ss/netstat.
Is port 67 TCP or UDP?
The registered protocol on this page is UDP. The same number behaves independently on each protocol: TCP may be listening while UDP is idle, so check them separately.
How do I check if port 67 is in use?
On Linux: sudo ss -tlnp 'sport = :67' for an exact port match. On macOS: sudo lsof -nP -iTCP:67 -sTCP:LISTEN. On Windows PowerShell: Get-NetTCPConnection -LocalPort 67 -State Listen. A listener counts as confirmed only when you can see the bind address and process name; without root/admin you will not see other users' processes.
Is port 67 secure? Should I open it in my firewall?
A port number has no inherent security — it depends on whether the listening service is correctly configured and whether it needs exposure at all. Keep loopback/internal-only services firewalled; where public access is required, pair it with source restrictions, VPN or authentication. The caution section on this page lists port-specific risks.
En bref
- Port
- 67
- Protocole
- UDP
- Catégories
- Système
- État d’utilisation
- 3 logiciels utilisant ce port
Ports associés
Besoin d’aide ?
Si vous trouvez des informations incorrectes ou souhaitez en ajouter, veuillez proposer une correction.
Proposer une correction